Product Picture
Application Picture
Application Picture
Application Picture
1   1

fischer Insulation fixing FID 50

Thermal bridge-free installation in insulation materials.

Art.-No. 48213
Top Features
  • No pre-drilling necessary in thin layers of plaster. This saves time.
  • With integrated bit mounting. This means that no special setting tool is required. This allows for a fast installation.

Product Description

The fischer insulation fixing FID is a fixing for mounting lightweight components in plastered and un-plastered insulation panels made of polystyrene and polyurethane. The fischer FID can be set either by hand, or with a cordless screwdriver. The special spiral thread taps itself in the insulating board. Components such as letter boxes, lamps or motion detectors can be mounted using a 4,5 to 5 mm screw.
Advantages
  • Since the anchor is set exclusively in the insulation itself, fixtures can be installed without thermal bridges.
  • The geometry of the FID allows for a simple installation in thin layers of plaster, without the need for pre-drilling, thus saving a stage of installation.
  • The FID 50 is used in thin insulating boards from 50mm. The FID 90 is used in thicker insulating boards, and can bear higher loads.
  • The bit mounting allows for setting with standard tools, thus allowing for a fast and economic installation.

Application and Permission

Applications
To fix lightweight fixtures in plastered and non-plastered insulating boards made of polystyrene and polyurethane.
The areas of application are:

  • Façade construction (ETICS)
  • Insulating construction
  • Electric construction
  • Refrigerated and climate construction
  • Acoustic construction
Building materials
  • Non-plastered, pressure-resistant insulating boards
  • Plastered, pressure-resistant insulating boards
  • ETICS insulating boards
You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality
  • The FID can be set in the insulating board with a cordless screwdriver or by hand.
  • For thick layers of plaster a pre-drilling (6 mm) is recommended.
  • The special spiral thread taps itself in the insulating board.
  • Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after successful pre-positioned installation.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture
Mounting Strip 2 Picture

Technical Data

Technical Data

Anchor length 50 [mm]
Min. bolt penetration 50 [mm]
Wood and chipboard screws 4.5 - 5.0 [mm]
Drive TX40
Max. bolt penetration 35 [mm]
Amount 50 [pcs.]
GTIN (EAN-Code) 4006209482131

Documents for Downloading

Additional Documents

fe80::3839:3dab:f52e:7cbe%6