Insulation fixing FID

Thermal bridge-free installation in insulation materials

The fischer insulation fixing FID is a plug for fixing light fixtures in plastered and non-plastered insulation panels made from polystyrene and polyurethane. The fischer FID is set by hand or using a cordless screwdriver. The special spiral thread taps itself in the insulating board. The fixtures - such as letterboxes, lamps, and motion detectors - can be secured with a 4.5 mm or 6 mm screw.

Product Description

Advantages

Since the anchor is set exclusively in the insulation itself, fixtures can be installed without thermal bridges.
The geometry of the FID allows for a simple installation in thin layers of plaster, without the need for pre-drilling, thus saving a stage of installation.
The FID 50 is used in thin insulating boards from 50mm. The FID 90 is used in thicker insulating boards, and can bear higher loads.
The bit mounting allows for setting with standard tools, thus allowing for a fast and economic installation.

Available Product Variants

10 Product variant (s) found

Variant

Anchor length

Min. bolt penetration

Wood and chipboard screws

d_s

Drive

Viewed 10 of 10 variant (s)

Application and Permission

Applications

To fix lightweight fixtures in plastered and non-plastered insulating boards made of polystyrene and polyurethane.
The areas of application are:

Façade construction (ETICS)
Insulating construction
Electric construction
Refrigerated and climate construction
Acoustic construction

Building materials

Non-plastered, pressure-resistant insulating boards
Plastered, pressure-resistant insulating boards
ETICS insulating boards

You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality

The FID can be set in the insulating board with a cordless screwdriver or by hand.
For thick layers of plaster a pre-drilling (6 mm) is recommended.
The special spiral thread taps itself in the insulating board.
Water ingress in the insulation can be prevented by sealing the plug collar with a suitable sealant after successful pre-positioned installation.

Documents for Downloading

Additional Documents

Load Table (PDF, 297 KB)

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

More Information

Anchor length l	50 [mm]
Min. bolt penetration	50 [mm]
Wood and chipboard screws d_s	4.5 - 5.0 [mm]
Drive	TX40
Max. bolt penetration l_E,max	35 [mm]
Contents	—
Amount	50 [St.]
GTIN (EAN-Code)	4006209482131

Anchor length l	50 [mm]
Min. bolt penetration	50 [mm]
Wood and chipboard screws d_s	4,5 - 6 [mm]
Drive	TX40
Max. bolt penetration l_E,max	35 [mm]
Contents	4 x FID 50 K
Amount	4 [St.]
GTIN (EAN-Code)	4048962059250

Anchor length l	50 [mm]
Min. bolt penetration	50 [mm]
Wood and chipboard screws d_s	4,5 - 6 [mm]
Drive	TX40
Max. bolt penetration l_E,max	35 [mm]
Contents	—
Amount	45 [St.]
GTIN (EAN-Code)	4048962199758

Anchor length l	50 [mm]
Min. bolt penetration	50 [mm]
Wood and chipboard screws d_s	4,5 - 6 [mm]
Drive	TX40
Max. bolt penetration l_E,max	35 [mm]
Contents	4 x FID GREEN 50 K
Amount	4 [St.]
GTIN (EAN-Code)	4048962199642

Anchor length l	50 [mm]
Min. bolt penetration	50 [mm]
Wood and chipboard screws d_s	4,5 - 6 [mm]
Drive	TX40
Max. bolt penetration l_E,max	— [mm]
Contents	4 x FID GREEN 50 K
Amount	4 [St.]
GTIN (EAN-Code)	4048962218473

Anchor length l	90 [mm]
Min. bolt penetration	90 [mm]
Wood and chipboard screws d_s	6 [mm]
Drive	6 mm / 6-kt
Max. bolt penetration l_E,max	75 [mm]
Contents	—
Amount	25 [St.]
GTIN (EAN-Code)	4048962104684