Product Picture
Application Picture
1   1

fischer Dynamic-Anchor FDA - A 12 x 100 / 50

Pre-mounted threaded rod for fast and easy push-through installation

Art.-No. 536944
Top Features
  • Approved for cracked concrete.
  • Absorption of dynamic alternating loads via optimum load distribution.

Product Description

The fischer Dynamic-Anchor FDA-A with prefitted threaded rod for quick installation. The steel anchor is suitable for push-through installation and small distances from the edge also allow fixing to the edge of panels. Tested security through general building regulations approval for innumerable load changes. The dynamic anchor can be glued completely to the drill hole wall using the injection mortar FIS HB. Thanks to the moderate load level, suitable for a large number of applications such as vehicle platform lifts, conveyor belts, industrial robots, cooperation robots and systems, as well as guide rails for elevators.
Advantages
  • Medium load level for a variety of applications.
  • Pre-assembled anchor rod for fast installation.
  • Assessed safety acc. to ETA.
  • Easy push-through installation leads to cost effectiveness – especially for serial installations.
  • Tight assortment with the size.
  • Less spacings and edge distances.
  • Drill holes are sealed.

Application and Permission

Applications
  • hydraulic ramps
  • Conveyor belts
  • Industrial robots
  • cooperation robots and -parts
  • Guide rails for elevators
Building materials
  • Concrete C20/25 to C50/60, cracked and non-cracked
You can find detailed information on building materials in the registration document.

Permission

  • ETA-06/0171
  • DoP No. 0085
  • DoP No. 0125
  • DoP No. 0280
  • (2103/12/12) - CM
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
  • FDA is approved for push-through installation.
  • Extruding the mortar causes the two components to be mixed and activated in the static mixer.
  • The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
  • The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
  • During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Show assembly instruction as PDF

Technical Data

Technical Data

ETA-approval
Drill diameter 14 [mm]
Anchorage depth 100 [mm]
Thread M12
Width across nut 19 [mm]
Amount 10 [pcs.]
GTIN (EAN-Code) 4048962252965
Legend   =  Permission Available

Documents for Downloading

Approvals

Title Type Created Valid Till
ETA Certification Document (PDF, 5 MB) European Technical Assessment fischer Highbond-anchor FHB - Bonded expansion fastener for use in concrete ETA-06/0171 23/06/2021
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance for fischer Highbond-Anchor FHB DoP No. 0085 29/04/2016
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance for fischer Highbond-Anchor FHB (Bonded anchor for use in concrete) DoP No. 0125 02/06/2017
DOP - Declaration of Performance (PDF, 5 MB) Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete) DoP No. 0280 30/06/2021
Test report (fire protection) (PDF, 870 KB) (2103/12/12) - CM 15/07/2021 15/07/2026
sc93-delivery-1