Dynamic-anchor FDA

The dynamic push-through anchor for an economical serial installation at medium load level

The fischer dynamic-anchor FDA is processed with the injection mortar FIS HB. The anchor has general building regulations approval for dynamic applications in cracked concrete. Because of its cone shape is us suitable for fixing moderate load levels of dynamic loads indoors. The preinstalled threaded rod and the push-through installation allow rapid progress and predestine it for economical series installation. Platform lifts and conveyor systems, for example, are fixed with the Dynamic-Anchor FDA.

Product Description

Advantages

Medium load level for a variety of applications.
Pre-assembled anchor rod for fast installation.
Assessed safety acc. to ETA.
Easy push-through installation leads to cost effectiveness – especially for serial installations.
Tight assortment with the size.
Less spacings and edge distances.
Drill holes are sealed.

Available Product Variants

4 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Anchorage depth

h_ef

Thread

Legend = Permission Available — = Permission not Available

Viewed 4 of 4 variant (s)

added to cart

View Cart

Application and Permission

Applications

hydraulic ramps
Conveyor belts
Industrial robots
cooperation robots and -parts
Guide rails for elevators

Building materials

Concrete C20/25 to C50/60, cracked and non-cracked

You can find detailed information on building materials in the registration document.

Permission

ETA-06/0171
DoP No. 0085
DoP No. 0125
DoP No. 0280
(2103/12/12) - CM

For Details see corresponding Documents

Assembly Instruction

Functionality

The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
FDA is approved for push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.

Show assembly instruction as PDF

Documents for Downloading

Additional Documents

Approvals

Title	Type	Created	Valid Till
ETA Certification Document (PDF, 5 MB) European Technical Assessment fischer Highbond-anchor FHB - Bonded expansion fastener for use in concrete	ETA-06/0171	23/06/2021
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance for fischer Highbond-Anchor FHB, according to European Technical Assessment ETA-06/0171	DoP No. 0085	29/04/2016
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance for fischer Highbond-Anchor FHB (Bonded anchor for use in concrete), according to European Technical Assessment ETA-06/0171	DoP No. 0125	02/06/2017
DOP - Declaration of Performance (PDF, 5 MB) Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete), according to European Technical Assessment ETA-06/0171	DoP No. 0280	30/06/2021
Test report (fire protection) (PDF, 870 KB)	(2103/12/12) - CM	15/07/2021	15/07/2026

System Components & Related Categories

System Components

Injection mortar FIS HB

Injection mortar FIS HB

The best performance in cracked concrete

More Information

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

ETA-approval
Drill diameter d₀	14 [mm]
Anchorage depth h_ef	100 [mm]
Thread M	M12
Width across nut	19 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962252941

ETA-approval
Drill diameter d₀	14 [mm]
Anchorage depth h_ef	100 [mm]
Thread M	M12
Width across nut	19 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962252965

ETA-approval
Drill diameter d₀	18 [mm]
Anchorage depth h_ef	125 [mm]
Thread M	M16
Width across nut	24 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962252972

ETA-approval
Drill diameter d₀	18 [mm]
Anchorage depth h_ef	125 [mm]
Thread M	M16
Width across nut	24 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962252989