FDA-A 12 x 100/25 gvz - fischer fixings

fischer Dynamic-Anchor FDA - A 12 x 100 / 25

Pre-mounted threaded rod for fast and easy push-through installation

Art.-No. 536943

Top Features

Approved for cracked concrete.
Absorption of dynamic alternating loads via optimum load distribution.

Product Description

The fischer Dynamic-Anchor FDA-A with prefitted threaded rod for quick installation. The steel anchor is suitable for push-through installation and small distances from the edge also allow fixing to the edge of panels. Tested security through general building regulations approval for innumerable load changes. The dynamic anchor can be glued completely to the drill hole wall using the injection mortar FIS HB. Thanks to the moderate load level, suitable for a large number of applications such as vehicle platform lifts, conveyor belts, industrial robots, cooperation robots and systems, as well as guide rails for elevators.

Advantages

Medium load level for a variety of applications.
Pre-assembled anchor rod for fast installation.
Assessed safety acc. to ETA.
Easy push-through installation leads to cost effectiveness – especially for serial installations.
Tight assortment with the size.
Less spacings and edge distances.
Drill holes are sealed.

Application and Permission

Applications

hydraulic ramps
Conveyor belts
Industrial robots
cooperation robots and -parts
Guide rails for elevators

Building materials

Concrete C20/25 to C50/60, cracked and non-cracked

You can find detailed information on building materials in the registration document.

Permission

ETA-06/0171
DoP No. 0085
DoP No. 0125
DoP No. 0280
(2103/12/12) - CM

For Details see corresponding Documents

Assembly Instruction

Functionality

The injection system suitable for tensile zones consists of the fischer dynamic anchor rod FDA-A dyn and the injection mortar FIS HB.
FDA is approved for push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.

Show assembly instruction as PDF

Technical Data

ETA-approval
Drill diameter	d₀	14	[mm]
Anchorage depth	h_ef	100	[mm]
Thread	M	M12
Width across nut	SW	19	[mm]
Amount		10	[pcs.]
GTIN (EAN-Code)		4048962252941

Legend = Permission Available

Documents for Downloading

Additional Documents

Approvals

Title	Type	Created	Valid Till
ETA Certification Document (PDF, 5 MB) European Technical Assessment fischer Highbond-anchor FHB - Bonded expansion fastener for use in concrete	ETA-06/0171	23/06/2021
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance for fischer Highbond-Anchor FHB	DoP No. 0085	29/04/2016
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance for fischer Highbond-Anchor FHB (Bonded anchor for use in concrete)	DoP No. 0125	02/06/2017
DOP - Declaration of Performance (PDF, 5 MB) Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)	DoP No. 0280	30/06/2021
Test report (fire protection) (PDF, 870 KB)	(2103/12/12) - CM	15/07/2021	15/07/2026