C-FIX
For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry.
  • Products
  • Training
  • Service
  • Expertise
  • fischer Stories
  • fischer group
C-FIX
Engineering

Includes current design standards, e.g. EN 1992-4 and EOTA TR 054 for the dimensioning of steel and bonded anchors in concrete as well as injection systems for anchoring in masonry. The anchor design in concrete can be performed either assuming a rigid base plate following a linear strain distribution or considering realistic stiffness conditions using a spring modeling approach. 

To the online version


C-FIX Offline

For the dimensioning of steel and bonded anchors in concrete as well as injection systems in masonry

Advantages:

  • The software is self-explanatory and intuitive in handling.
  • The multiple design shows the most economic solution.
  • All standard European profile types are available.
  • Results are presented compactly in the result overview.
  • Current design standards are implemented.
  • The appropriate anchor length is calculated and displayed automatically.
     

Link to downlaod

Spring model in C-FIX Online

The linear spring model combined with a finite-element approach allows the determination of anchor forces of group fixings. This allows the comparison between anchor forces of linear force distribution and realistic anchor forces.

The calculation is conducted with the well-established finite element software RFEM® by Dlubal® in the background of our servers. The modelling and verifications are performed as usual in C-FIX Online.

 
  • Increasing the base plate thickness
  • Enlarging the connected profile
  • Applying additional stiffeners
  • Selecting another anchor system to optimize the force distribution
  • Changing the spacings.
     

To spring model


Your time is valuable!

The FEM calculation add-on module provides you with further information for verifying the sufficiently rigid anchor plate in the software. It is no longer necessary to switch between the C-FIX Online anchor software and FEM statics software for the anchor plate. Dimensioning in just one program saves you double work and a lot of time.

C-FIX Offline

In addition to all current design standards C-FIX Offline includes also the verification according to „ENSO“ (Engineering Solution) which allows the calculation of extended design models that are possible according to fib. Furthermore, the module settings can be individually adapted to the local requirements.

To the offline version

Advantages C-FIX Offline

  • Design of injection systems in masonry.
  • Design under dynamic actions - threshold or alternating loads.
  • Design under seismic action (earthquake).
  • Measurement under extraordinary stress.

Download and System requirements FiXperience

In order to have the best performance and thus generate the maximum benefit for our customers, we always work with the latest and best systems in the field of software development.

Thereby, we achieve a higher speed during the downloads and updates and a better performance during the usage of our programs. Furthermore, we developed three ways of downloads, whereby each doing full justice to a particular group of users.  

Downloads

Online Installer (individual position version)

MSI Network-package for administrators (network-version)​

Offline Installation (CD Version)

System requirements

Main memory: Min. 8 GB

Operating systems:  Windows® 11Processor: x64-based processor (ARM processors are not supported)

Note: The current system requirements may vary based on your system configuration and your operating system.

cd-blue-668c5f6576-vjfgv