The sleeve anchor for the push-through installation of structural anchorings in non-cracked concrete

Sleeve anchor FSA-B

The fischer sleeve anchor FSA-B is made from zinc-plated steel with a nut and washer for structural anchors made from zinc-plated steel. The fischer sleeve anchor is ideal for the fixation of non-safety-relevant anchorings such as cantilevers, handrails, and cable trays in non-cracked concrete. The optimised anchor geometry offers a high shear load resistance and a high level of safety. The FSA-B is installed in a time-saving push-through installation. During tightening, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The recesses act as a crumple zone to take the torque slippage. In this way, the fixture is pulled onto the base material.
Product variantsDownload of image data

Product variants

10 Product variant (s)
Drill diameter
Min. drill hole depth for through fixings
Width across nut
Washer (outer diameter x thickness)
Viewed 10 of 10 variant (s)

The advantages / Product description

Application and approval

Assembly instruction

Documents for download