Bolt anchor FWA Plus

Product variants

Approvals / Test reports

10 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Min. effect. anchorage depth

Thread

Anchor length

Washer (outer diameter x thickness)

Legend = Permission Available— = Permission not Available

Viewed 10 of 10 variant (s)

Advantages

The ETA Option 7 for non-cracked concrete ensures a high quality standard.
With the standard anchoring depth, the FWA Plus achieves the highest load-bearing capacity. This means fewer fixing points and smaller anchoring plates.
The impact pin protects the thread from damage and thus ensures time-saving installation and removal of the attachment.
The comprehensive M8-M16 range in galvanised steel enables a wide range of indoor fastenings.
Quick and easy installation is made possible with the help of the FA-ST II setting tool.

Functionality

The FWA Plus is suitable for pre-positioned and push-through installation.
When the nut is tightened, the conical bolt is pulled into the expansion clip and braces it against the wall of the drill hole.
When the specified torque is reached, the anchor is set in accordance with the approval.
For series installation, we recommend using the FABS or FA-ST II bolt anchor setting tools.

Mounting Strip 1 Picture

1 / 5

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	70 mm
Min. effect. anchorage depth( h_ef )	48 mm
Thread( ø x length )	M8 x 36 mm
Anchor length( l )	71 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528602

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	75 mm
Min. effect. anchorage depth( h_ef )	48 mm
Thread( ø x length )	M8 x 41 mm
Anchor length( l )	76 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528619

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	95 mm
Min. effect. anchorage depth( h_ef )	48 mm
Thread( ø x length )	M8 x 59 mm
Anchor length( l )	96 mm
Washer (outer diameter x thickness)	16 x 1.6 mm
Width across nut	13 mm
Installation torque( T_inst )	10 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528626

ETA-approval
Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	85 mm
Min. effect. anchorage depth( h_ef )	50 mm
Thread( ø x length )	M10 x 46 mm
Anchor length( l )	84 mm
Washer (outer diameter x thickness)	20 x 2.0 mm
Width across nut	17 mm
Installation torque( T_inst )	15 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528640

ETA-approval
Drill diameter( d₀ )	10 mm
Min. drill hole depth for through fixings( h₂ )	95 mm
Min. effect. anchorage depth( h_ef )	50 mm
Thread( ø x length )	M10 x 56 mm
Anchor length( l )	94 mm
Washer (outer diameter x thickness)	20 x 2.0 mm
Width across nut	17 mm
Installation torque( T_inst )	15 Nm
Amount	50 pcs
GTIN (EAN-Code)	4048962528657