With a large washer, in line with timber construction standards. For highest demands. Powerful and flexible

Bolt anchor FAZ II Plus HBS

Name: Bolt anchor FAZ II Plus HBS
Brand: fischer

The fischer bolt anchor FAZ II Plus HBS with its washer as per the wood construction standard DIN 1052 is the ideal steel anchor for the highest requirements. The anchor is made from zinc-plated and stainless steel and is perfect for the fixation of sills and beams. The large washer ensures even better force transfer. Thanks to the variable anchorage depths and the easy assembly process, the FAZ II Plus HBS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly powerfully and enables a top load-bearing capacity.

Product variants

Download of image data

Product variants

Approvals / Test reports

4 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Max. usable length hef,stand./hef,min.

Anchor length

Thread

Width across nut

Legend = Permission Available— = Permission not Available

Viewed 4 of 4 variant (s)

Advantages

The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example.
The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
Quick and easier assembly without the need for drill hole cleaning (M8-M24).
Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
The variable anchorage depths allow a millimetre-accurate adjustment to the loads.

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Beton C20/25 bis C50/60, gerissen und ungerissen

Also suitable for:

Concrete C12/15 (classification available)
Concrete C80/95 (classification available)
Steel fiber concrete (classification available)
Solid sand-lime brick (classification available)

You can find detailed information on building materials in the registration document.

Approvals

ETA-19/0520
ETA-20/0897
DoP No. 0334
DoP No. 0337
3023222

Functionality

The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations.
Before installation, place the hex nut and washer as per the wood construction standard into the optimum position.
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

Mounting Strip 3 Picture

1 / 8

ETA Certification Document

pdf, ETA-19/0520

European Technical Assessment for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR - Mechanical fasteners for use in concrete

Created on 24/05/2023

DOP - Declaration of Performance

pdf, DoP No. 0334

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus, FAZ II Plus R, FAZ II Plus HCR (Mechanical anchor for use in concrete)

Created on 31/05/2023

ETA Certification Document

pdf, ETA-20/0897

European Technical Assessment for fischer Bolt Anchor FAZ II Plus dynamic - Post-installed fasteners in concrete under fatigue cyclic loading

Created on 22/05/2023

DOP - Declaration of Performance

pdf, DoP No. 0337

Declaration of Performance for for fischer Bolt Anchor FAZ II Plus dynamic (Post-installed fastening in cracked or uncracked concrete)

Created on 05/06/2023

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Load Table

pdf,

Bolt anchor FAZ II Plus - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Bolt anchor FAZ II Plus dynamic - Design values for cyclic fatigue loading of a single anchor in cracked or non-cracked normal concrete of strength class C20/25.

Marketing Documents

pdf,

FAZ II Plus.

System components

Hammer drill bit Quattric II S / Quattric II
84 variants

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	190 mm
Max. usable length hef,stand./hef,min. ( t_fix )	100 / 120 mm
Anchor length ( l )	205 mm
Thread ( ø x length )	M12 x 151 mm
Width across nut	19 mm
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4048962463088

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	210 mm
Max. usable length hef,stand./hef,min. ( t_fix )	120 / 140 mm
Anchor length ( l )	225 mm
Thread ( ø x length )	M12 x 171 mm
Width across nut	19 mm
Packaging	—
Amount	20 pcs.
GTIN (EAN-Code)	4048962463095

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	16 mm
Min. drill hole depth for through fixings ( h₂ )	270 mm
Max. usable length hef,stand./hef,min. ( t_fix )	160 / 180 mm
Anchor length ( l )	278 mm
Thread ( ø x length )	M16 x 189 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4048962463101

ETA-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	16 mm
Min. drill hole depth for through fixings ( h₂ )	310 mm
Max. usable length hef,stand./hef,min. ( t_fix )	200 / 220 mm
Anchor length ( l )	328 mm
Thread ( ø x length )	M16 x 189 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4048962463118

Bolt anchor FAZ II Plus HBS

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download