Brass fixing PA 4

The brass fixing for thin board building materials and solid building materials

The fischer brass fixing PA 4 PA 4 is a special plug for fixing metric screws in thin panel building materials. The special fixing is ideal for fixing handles, angle brackets or lamps in wooden board building materials, plastic boards, but also in concrete, solid brick and sand-lime solid brick. The brass fixing is set in a pre-positioned installation. When screwing in the screw, the plug expands and anchors itself in the building material. The special surface structure of the PA 4 prevents the fixing from rotating in the drill hole. This increases installation safety.

Product Description

Advantages

The short brass fixing PA 4 only requires a very low anchorage depth and is therefore the solution for thin board building materials.
The special surface structure of the PA 4 prevents the fixing from rotating in the drill hole. This provides increased installation safety.
The internal thread allows for the use of standard metric screws and enables the ideal adaptation to suit the intended use.

Available Product Variants

7 Product variant (s) found

Variant

Drill diameter

d₀

Min. drill hole depth

h₁

Anchor length

Thread

Viewed 7 of 7 variant (s)

Application and Permission

Applications

Handles
Angle brackets
Furniture fittings
Lamps

Building materials

Wooden board building materials
Plastic boards
Concrete
Solid brick
Solid sand-lime brick
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality

The PA 4 is suitable for pre-positioned installation.
Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate.
Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length

Documents for Downloading

Additional Documents

Load Table (PDF, 136 KB)

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

More Information

Drill diameter d₀	8 [mm]
Min. drill hole depth h₁	7,5 [mm]
Anchor length l	— [mm]
Thread M	M 6
Bolt penetration s	7,5 [mm]
Effect. anchorage depth h_ef	7,5 [mm]
Contents	—
Amount	200 [pcs.]
GTIN (EAN-Code)	4006209504840

Drill diameter d₀	8 [mm]
Min. drill hole depth h₁	13.5 [mm]
Anchor length l	— [mm]
Thread M	M 6
Bolt penetration s	13.5 [mm]
Effect. anchorage depth h_ef	13.5 [mm]
Contents	5 x PA 4 M6/13.5
Amount	5 [pcs.]
GTIN (EAN-Code)	4048962059311

Drill diameter d₀	10 [mm]
Min. drill hole depth h₁	25 [mm]
Anchor length l	25 [mm]
Thread M	M 8
Bolt penetration s	25 [mm]
Effect. anchorage depth h_ef	25 [mm]
Contents	4 x PA 4 M8/25
Amount	4 [pcs.]
GTIN (EAN-Code)	4048962059328

Drill diameter d₀	10 [mm]
Min. drill hole depth h₁	25 [mm]
Anchor length l	25 [mm]
Thread M	M 8
Bolt penetration s	25 [mm]
Effect. anchorage depth h_ef	25 [mm]
Contents	—
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209504857

Drill diameter d₀	8 [mm]
Min. drill hole depth h₁	10.5 [mm]
Anchor length l	— [mm]
Thread M	M 6
Bolt penetration s	10.5 [mm]
Effect. anchorage depth h_ef	10.5 [mm]
Contents	—
Amount	100 [pcs.]
GTIN (EAN-Code)	4006209584842

Drill diameter d₀	12 [mm]
Min. drill hole depth h₁	25 [mm]
Anchor length l	25 [mm]
Thread M	M 10
Bolt penetration s	25 [mm]
Effect. anchorage depth h_ef	25 [mm]
Contents	—
Amount	25 [pcs.]
GTIN (EAN-Code)	4006209504864