Product Picture
Application Picture
Application Picture
1   1

FIS-Rebar case

Professional rebar connections

The fischer FIS rebar case contains the accessories, approvals, and documentation required for the creation of approval-compliant rebar connections. The box is lined with foam and contains eight cleaning brushes with a diameter of 12 - 55 mm, five extensions for cleaning brushes, an SDS socket with M8 internal thread, 24 injection adapters, a cleaning tube, a brush control cartridge, eight cleaning nozzles, a marking tape, a digital thermometer, safety goggles, installation instructions, 10 setting protocols, two flat spanners, and the corresponding approvals.

Product Description

  • The FIS rebar case contains all of the individual components required for the creation of rebar connections, thus ensuring an easy installation.
  • The components are used with the injection mortars FIS SB, FIS EM Plus, or FIS V depending on requirements.
  • With the injection mortars FIS V and FIS VS LOW SPEED, the rebar connections can be realised with a diameter of 8 to 28 mm, and with FIS EM a diameter of up to 40 mm can be achieved if required This offers maximum flexibility.
  • The injection mortar FIS SB allows the user to realise rebar connections with a diameter of 8 to 32 mm in conjunction with easy and therefore user-friendly drill hole cleaning.
  • FIS EM Plus also allows for the execution of rebar connections in diamond-drilled holes.

Available Product Variants


Application and Permission

  • Post-installed rebar connections
Building materials
  • Concrete
You can find detailed information on building materials in the registration document.


  • ETA-15/0539, ETAG 001-5
  • ETA-16/0909
  • ETA-17/1056, ETAG 001-5
For Details see corresponding Documents

Assembly Instruction

  • Anchoring as with cast-in reinforcement bars in line with Eurocode 2 and DIN 1045-1.
  • The mortar is extruded bubble free into the drill hole using the injection adapter. The geometry causes a build-up of pressure in the drill hole, which pushes the injection adapter and extension tube automatically out of the drill hole.
  • The mortar bonds the entire surface of the reinforcement bar with the drill hole wall.
  • A special certification is necessary for installation according to approval in Germany. The fischer Academy offers the relevant training courses.
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture
Mounting Picture

Documents for Downloading

Additional Documents


Title Type Created Valid Till
ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment Rebar connection with fischer FIS VL ETA-15/0539, ETAG 001-5 27/08/2015
ETA - European Technical Assessment (PDF, 4 MB) ETA-16/0909 03/04/2017
ETA - European Technical Assessment (PDF, 5 MB) ETA-17/1056, ETAG 001-5 07/02/2020