TermoZ CS II

Product variants

Approvals / Test reports

7 Product variant (s)

Drill diameter

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

Viewed 7 of 7 variant (s)

Advantages

Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
Due to the special expansion zone of the anchor sleeve the TermoZ CS II is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
The plate design and the sleeve labeling allow correct and intuitive application.
The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush installation in all conventional insulation materials
Countersunk installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
Fixing of ETICS insulating boards for new buildings and energetic building renovations
The screw fixing is approved for both fixing ETICS to ceiling soffits and for ETICS with solid coverings.

Building materials

Building material classes A, B, C, D, E
Concrete
Concrete (weather shell)
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-14/0372
DoP No. 0298
DoP No. 0346
EPD-FIW-20210314-CBD1-EN

Functionality

The fixing is pushed through the insulation into the drill hole and is screwed in. For ceiling soffits, the installation is carried out through the reinforcing layer and insulation.
For countersunk mounting, the setting tool TermoZ CS is required.
Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
For countersunk mounting the anchor plate needs to be covered with a round cap.
For a surface-flush setting, a round cap is not necessary.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-14/0372

European Technical Assessment for fischer TermoZ CS II 8 and fischer TermoZ CS II 8 DT 110 V

Created on 03/11/2023

DOP - Declaration of Performance

pdf, DoP No. 0346

Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic anchors for use in concrete)

Created on 17/11/2023

DOP - Declaration of Performance

pdf, DoP No. 0298

Declaration of Performance for fischer TermoZ CS II 8 / TermoZ CS II 8 DT 110 V (Plastic fastener for fixing of external thermal insulation composite systems with rendering)

Created on 16/05/2022

ETA-approval
Drill diameter( d₀ )	8 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962417234

ETA-approval
Drill diameter( d₀ )	8 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962417241

ETA-approval
Drill diameter( d₀ )	8 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962417258

ETA-approval
Drill diameter( d₀ )	8 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962417265

ETA-approval
Drill diameter( d₀ )	8 mm
Amount	100 pcs
GTIN (EAN-Code)	4048962417272

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download