TermoZ CN 8 - fischer fixings

TermoZ CN 8

The high-performance ETICS hammerset fixing with compound nail

The fischer TermoZ CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The TermoZ CN comprises a grey plug sleeve with attached disc and a compound nail. The TermoZ CN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The steel point of the compound nail guarantees high holding forces. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Product Description

Advantages

To set with few hammer blows.
The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
High retention forces thanks to the steel tip of the compound nail.
Small anchoring depth of 35 mm saves on drilling times.
The TermoZ CN is virtually free of thermal bridging due to the compound nail.
The compression zone in the shank allows the disc to be drawn in precisely.
Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
For insulating material thicknesses up to 340 mm.

Available Product Variants

15 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Anchor length

Effect. anchorage depth

h_ef

Legend = Permission Available — = Permission not Available

Viewed 15 of 15 variant (s)

added to cart

View Cart

Application and Permission

Applications

Attachment of ETICS insulating boards on concrete and masonry
Flush-to-surface installation in ETICS insulating materials e.g. polystyrene and mineral wool

Building materials

Building material classes A, B, C, D, E
Concrete
Full blocks made from concrete
Building brick
Solid sand-lime brick
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Lightweight aggregate concrete
Aerated concrete

You can find detailed information on building materials in the registration document.

Permission

ETA-09/0394
ETA-09/0394
DoP 0251
DoP No. 0055
DoP No. 0091
DoP No. 0112
EPD-FIW-20210314-CBD1-EN

For Details see corresponding Documents

Assembly Instruction

Functionality

The fixing is set in push- through installation.
Simple, fast setting by driving the compound nail in using a standard hammer.
Non load bearing layers such as adhesive and old plaster are included in the maximum useful length.

Documents for Downloading

Additional Documents

Load Table (PDF, 36 KB)

Approvals

Title	Type	Created	Valid Till
ETA Certification Document (PDF, 3 MB) European Technical Assessment for fischer termoz CN 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry	ETA-09/0394	18/03/2016
ETA Certification Document (PDF, 5 MB) European Technical Assessment for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8 - Nailed-in plastic anchor for fixing of external thermal insulation composite systems with rendering in concrete and masonry	ETA-09/0394	19/12/2017
DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8	DoP 0251	08/01/2021
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance	DoP No. 0055	29/03/2016
DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8, according European Technical Assessment ETA-09/0394	DoP No. 0091	06/04/2017
DOP - Declaration of Performance (PDF, 4 MB) Declaration of Performance	DoP No. 0112	04/01/2018
EPD - Environmental Product Declaration (PDF, 932 KB) Environmental Product Declaration for fischer Insulation fixings	EPD-FIW-20210314-CBD1-EN	22/02/2022	21/02/2027

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

More Information

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	108 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962080988

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	128 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962080995

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	148 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962081008

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	168 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962081015

ETA-approval
Drill diameter d₀	8 [mm]
Anchor length l	188 [mm]
Effect. anchorage depth h_ef	35 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962081022