Highbond anchor FHB II-A S Inject

The economical solution in cracked concrete

The Highbond anchor rod FHB II-AS Inject R is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AS Inject R for example guard rails and steel constructions are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Product Description

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AS Inject R (short version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

Available Product Variants

9 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Anchorage depth

h_ef

Total length

Legend = Permission Available — = Permission not Available

Viewed 9 of 9 variant (s)

added to cart

View Cart

Application and Permission

Applications

Guard rails
Façades
Staircases
Steel constructions
Masts

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

You can find detailed information on building materials in the registration document.

Permission

ETA-16/0637, ETAG 001-5
DoP No. 0084
DoP No. 0129
(2103/12/12) - CM
GS 3.2/16-352-1

For Details see corresponding Documents

Assembly Instruction

Functionality

The FHB II-AS Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Documents for Downloading

Additional Documents

Load Table (PDF, 50 KB)

Approvals

Title	Type	Created	Valid Till
ETA - European Technical Assessment (PDF, 6 MB) European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete	ETA-16/0637, ETAG 001-5	14/12/2017
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance fischer Highbond-Anchor FHB II Inject, according European Technical Assessment ETA-16/0637	DoP No. 0084	31/01/2017
DOP - Declaration of Performance (PDF, 4 MB)	DoP No. 0129	20/12/2017
Test report (fire protection) (PDF, 870 KB)	(2103/12/12) - CM	15/07/2021	15/07/2026
Test report (fire protection) (PDF, 3 MB)	GS 3.2/16-352-1	07/02/2017	06/02/2027

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Hollow drill bit FHD Max

Hollow drill bit for drilling with low dust as well as for efficient and approved anchoring

More Information

Hollow drill bit FHD

Hollow drill bit for drilling with low dust as well as for efficient and approved anchoring

More Information

ETA-approval
Drill diameter d₀	10 [mm]
Anchorage depth h_ef	60 [mm]
Total length l	90 [mm]
Usable length t_fix	10 [mm]
Thread M	M10
Width across nut	17 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962272925

ETA-approval
Drill diameter d₀	10 [mm]
Anchorage depth h_ef	60 [mm]
Total length l	180 [mm]
Usable length t_fix	100 [mm]
Thread M	M10
Width across nut	17 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962272956

ETA-approval
Drill diameter d₀	10 [mm]
Anchorage depth h_ef	60 [mm]
Total length l	100 [mm]
Usable length t_fix	20 [mm]
Thread M	M10
Width across nut	17 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962272932

ETA-approval
Drill diameter d₀	10 [mm]
Anchorage depth h_ef	60 [mm]
Total length l	110 [mm]
Usable length t_fix	30 [mm]
Thread M	M10
Width across nut	17 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962273069

ETA-approval
Drill diameter d₀	10 [mm]
Anchorage depth h_ef	60 [mm]
Total length l	120 [mm]
Usable length t_fix	40 [mm]
Thread M	M10
Width across nut	17 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962272949

ETA-approval
Drill diameter d₀	12 [mm]
Anchorage depth h_ef	75 [mm]
Total length l	123 [mm]
Usable length t_fix	25 [mm]
Thread M	M12
Width across nut	19 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962273076

ETA-approval
Drill diameter d₀	16 [mm]
Anchorage depth h_ef	95 [mm]
Total length l	150 [mm]
Usable length t_fix	30 [mm]
Thread M	M16
Width across nut	24 [mm]
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962273007