Highbond anchor FHB II-A S

Advantages

The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.

45 Product variant (s) found

Variant

ETA-approval

Drill diameter

d₀

Drill hole depth

h₀

Anchorage depth

h_ef

Legend = Permission Available — = Permission not Available

More results Viewed 18 of 45 variant (s)

0

Applications

Suitable for:

Guard rails
Façades
Staircases
Steel brackets
Masts
Rash protection
Steelwork constructions
Timber constructions

Ideal for:

Push-through installation

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

You can find detailed information on building materials in the registration document.

Permission

ETA-05/0164
ETA-05/0164, ETAG 001-5
DoP No. 0019
DoP No. 0085
DoP No. 0130

For Details see corresponding Documents

Functionality

The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Additional Documents

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete	ETA-05/0164	14/12/2017
ETA - European Technical Assessment (PDF, 4 MB) European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete	ETA-05/0164, ETAG 001-5	24/01/2017
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance fischer Highbond-System FHB II	DoP No. 0019	31/01/2017
DOP - Declaration of Performance (PDF, 2 MB)	DoP No. 0085	02/06/2017
DOP - Declaration of Performance (PDF, 5 MB)	DoP No. 0130	20/12/2017
Filling Quantities (PDF, 112 KB)

System Components

Injection mortar FIS HB

Injection mortar FIS HB

The best performance in cracked concrete

More Information

Hollow drill bit FHD Max

Hollow drill bit for drilling with low dust as well as for efficient and approved anchoring

More Information

Hollow drill bit FHD

Hollow drill bit for drilling with low dust as well as for efficient and approved anchoring

More Information

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Related Categories

Highbond anchor FHB II-A L

The best performance in cracked concrete for maximum tensile loads

More Information

Resin capsule FHB II-P / FHB II-PF HIGH SPEED

The best performance in cracked concrete

More Information

ETA-approval
Drill diameter d₀	10 [mm]
Drill hole depth h₀	75 [mm]
Anchorage depth h_ef	60 [mm]
Usable length t_fix	10 [mm]
Thread M	M 10
Width across nut	17 [mm]
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209970720

ETA-approval
Drill diameter d₀	10 [mm]
Drill hole depth h₀	75 [mm]
Anchorage depth h_ef	60 [mm]
Usable length t_fix	100 [mm]
Thread M	M 10
Width across nut	17 [mm]
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209972069

ETA-approval
Drill diameter d₀	10 [mm]
Drill hole depth h₀	75 [mm]
Anchorage depth h_ef	60 [mm]
Usable length t_fix	20 [mm]
Thread M	M 10
Width across nut	17 [mm]
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209970737

ETA-approval
Drill diameter d₀	10 [mm]
Drill hole depth h₀	75 [mm]
Anchorage depth h_ef	60 [mm]
Usable length t_fix	60 [mm]
Thread M	M 10
Width across nut	17 [mm]
Scale parts mortar	3
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209970744

ETA-approval
Drill diameter d₀	10 [mm]
Drill hole depth h₀	90 [mm]
Anchorage depth h_ef	75 [mm]
Usable length t_fix	10 [mm]
Thread M	M 10
Width across nut	17 [mm]
Scale parts mortar	4
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962077964

ETA-approval
Drill diameter d₀	12 [mm]
Drill hole depth h₀	90 [mm]
Anchorage depth h_ef	75 [mm]
Usable length t_fix	10 [mm]
Thread M	M 12
Width across nut	19 [mm]
Scale parts mortar	4
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209972571

ETA-approval
Drill diameter d₀	16 [mm]
Drill hole depth h₀	110 [mm]
Anchorage depth h_ef	95 [mm]
Usable length t_fix	100 [mm]
Thread M	M 16
Width across nut	24 [mm]
Scale parts mortar	8
Packaging	Folding box
Amount	10 [pcs.]
GTIN (EAN-Code)	4006209972953

ETA-approval
Drill diameter d₀	25 [mm]
Drill hole depth h₀	190 [mm]
Anchorage depth h_ef	170 [mm]
Usable length t_fix	50 [mm]
Thread M	M 20
Width across nut	— [mm]
Scale parts mortar	26
Packaging	Folding box
Amount	4 [pcs.]
GTIN (EAN-Code)	4048962078305

The best performance in cracked concrete with the least installation effort