Bolt anchor EXA-IG

The installation-friendly fixing with internal thread for non-cracked concrete

The fischer bolt anchor EXA is a particularly installation-friendly steel anchor with an internal thread for anchorings in non-cracked concrete. The two expansion clips increase the expansion range and reduce the torque slippage. In the stainless steel design, the bolt anchor with internal thread is suitable for the anchoring of railings, cantilevers, and cable trays outside. Thanks to the internal thread, threaded rods and metric screws for fixture anchoring can be installed and removed with a low amount of effort.

Product Description

Advantages

The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the fixture.
The short version EXA K*) can be used in thinner components due to the low anchorage depth.

*) not covered by technical approval

Available Product Variants

8 Product variant (s) found

Variant

Drill diameter

d₀

Total length

Thread

Ø x length

Min. drill hole depth for pre-positioned installation

h₁

Viewed 8 of 8 variant (s)

Application and Permission

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades

Building materials

Approved for:

Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Assembly Instruction

Functionality

The EXA is suitable for pre-positioned and push-through installation.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Documents for Downloading

Additional Documents

Load Table (PDF, 492 KB)

System Components & Related Categories

System Components

Accessories

Accessories

Machine-aided installation for a faster installation time

More Information

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Related Categories

Bolt anchor EXA

The installation-friendly fixing in non-cracked concrete

More Information

Drill diameter d₀	8 [mm]
Total length l	48 [mm]
Thread Ø x length	M 6 [mm]
Min. drill hole depth for pre-positioned installation h₁	60 [mm]
Min. bolt penetration l_E,min	6 [mm]
Max. bolt penetration l_E,max	15 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962115352

Drill diameter d₀	10 [mm]
Total length l	50 [mm]
Thread Ø x length	— [mm]
Min. drill hole depth for pre-positioned installation h₁	60 [mm]
Min. bolt penetration l_E,min	8 [mm]
Max. bolt penetration l_E,max	20 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962115369

Drill diameter d₀	12 [mm]
Total length l	53 [mm]
Thread Ø x length	M 10 [mm]
Min. drill hole depth for pre-positioned installation h₁	65 [mm]
Min. bolt penetration l_E,min	10 [mm]
Max. bolt penetration l_E,max	25 [mm]
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4048962115376

Drill diameter d₀	16 [mm]
Total length l	85 [mm]
Thread Ø x length	M 12 [mm]
Min. drill hole depth for pre-positioned installation h₁	95 [mm]
Min. bolt penetration l_E,min	12 [mm]
Max. bolt penetration l_E,max	30 [mm]
Packaging	Folding box
Amount	25 [pcs.]
GTIN (EAN-Code)	4048962115383

Drill diameter d₀	8 [mm]
Total length l	48 [mm]
Thread Ø x length	M 6 [mm]
Min. drill hole depth for pre-positioned installation h₁	60 [mm]
Min. bolt penetration l_E,min	6 [mm]
Max. bolt penetration l_E,max	15 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4048962115390