Bolt anchor EXA

The installation-friendly fixing in non-cracked concrete

The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

Product Description

Advantages

The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation.
The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
The short version EXA K*) can be used in thinner components due to the low anchorage depth.

Available Product Variants

29 Product variant (s) found

Variant

Drill diameter

d₀

Min. drill hole depth for through fixings

h₂

Anchor length

Thread

Ø x length

More results

Viewed 18 of 29 variant (s)

added to cart

View Cart

Application and Permission

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades

Building materials

Approved for:

Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Permission

ETA-05/0185
DoP 0258
DoP No. 0014

Assembly Instruction

Functionality

The EXA is suitable for pre-positioned and push-through installation.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Documents for Downloading

Additional Documents

Load Table (PDF, 492 KB)

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 452 KB) European Technical Assessment for fischer Anchor bolt EXA	ETA-05/0185	19/06/2018
DOP - Declaration of Performance (PDF, 534 KB)	DoP 0258	15/01/2021
DOP - Declaration of Performance (PDF, 387 KB)	DoP No. 0014	26/06/2018

System Components & Related Categories

System Components

Hammer drill bit Quattric II

Hammer drill bit Quattric II

The expert for the best performance in reinforced concrete

More Information

Setting tool FABS

Machine-aided installation for a faster installation time

More Information

Related Categories

Bolt anchor EXA-IG

The installation-friendly fixing with internal thread for non-cracked concrete

More Information

Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	50 [mm]
Anchor length l	50 [mm]
Thread Ø x length	M6 x 17 [mm]
Width across nut	10 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4006209977293

Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	70 [mm]
Anchor length l	70 [mm]
Thread Ø x length	M6 x 17 [mm]
Width across nut	10 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4006209977309

Drill diameter d₀	6 [mm]
Min. drill hole depth for through fixings h₂	100 [mm]
Anchor length l	100 [mm]
Thread Ø x length	M6 x 17 [mm]
Width across nut	10 [mm]
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4006209977316

Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	60 [mm]
Anchor length l	60 [mm]
Thread Ø x length	M8 x 22 [mm]
Width across nut	13 [mm]
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209977323

Drill diameter d₀	8 [mm]
Min. drill hole depth for through fixings h₂	80 [mm]
Anchor length l	85 [mm]
Thread Ø x length	M8 x 22 [mm]
Width across nut	13 [mm]
Packaging	Folding box
Amount	50 [pcs.]
GTIN (EAN-Code)	4006209977330

Drill diameter d₀	12 [mm]
Min. drill hole depth for through fixings h₂	75 [mm]
Anchor length l	76 [mm]
Thread Ø x length	M12 x 30 [mm]
Width across nut	19 [mm]
Packaging	—
Amount	25 [pcs.]
GTIN (EAN-Code)	4006209977422