Assembly adhesive MK

The building adhesive for interior areas with high initial adhesion

The fischer assembly adhesive Premium MK is ideally suited for particularly strong and lasting connections of different building materials including natural stone and foamed polystyrene inside. With a really high initial adhesion of 140 kg/m² and high final strength of up to 22 kg/cm² for wood-to-wood connections, the MK can secure skirting, timber substructures, decorative, acoustic and insulation panels, cable ducts, window sills, tiles and door signs. It adheres immediately and is free from solvents and silicone.

Product Description

  • The extremely high initial adhesion of 200 kg/m² makes it possible to attach lots of components without the need for additional fixings, and thus reduces the amount of time required.
  • The components can be adjusted for a few minutes after they have been attached. This makes installation easier.
  • The acrylate adhesive has a neutral odour and is therefore ideal for use in confined spaces.
  • The special recipe makes it compatible with foamed polystyrene, e.g. Styrofoam®. MK is, therefore, suitable for a broad range of applications.

Available Product Variants

1 Product variant (s) found

1 Product variant (s) found



310 [ml]


12 [pcs.]

Viewed 1 of 1 variant (s)

added to cart

Application and Permission

  • Skirting
  • Timber sub-structures
  • Décorative, acoustic and insulation panels
  • Cable ducts
  • Window sills
  • Tiles
  • Door signs
Building materials
  • Concrete
  • Pumice
  • Fibre cement
  • Gypsum
  • Gypsum plasterboard
  • Wood
  • H-PVC
  • Sand-lime brick
  • Clinker brick
  • Masonry
  • Metal
  • Polystyrene hard foam
  • Aerated concrete
  • Plaster
  • Brick
You can find detailed information on building materials in the registration document.

Assembly Instruction

  • Chemical base: One-component acrylate dispersion
  • Creme white in colour
  • Processing temperature +10°C to +30°C
  • Setting time approx. 15 minutes
  • Very high initial adhesion of 200 kg/m²
  • Fully functional after 24 to 48 hours
  • Temperature resistance -20°C to +60°C
  • Non-drip (suitable for use on ceilings)
  • Addresses uneven surfaces
  • At least one of the components to be bonded must be absorbent.
  • Reclosable nozzle
  • Free from solvents, silicone and MDI
  • Extrude with silicone application gun

Documents for Downloading