fischer Internal threaded sockets FIS E 8 x 80 K

The internal threaded anchor for masonry and aerated concrete

Art.-No. 532655
Top Features
  • Conventional metric screws and threaded rods can be used. This lowers costs and complexity.
  • Surface flush removal possible. Fixing points can be reused.
  • ETA approval for maximum safety.

Product Description

The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.
Advantages
  • The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
  • The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
  • The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
  • Please refer to the approvals for the mortar used.

Application and Permission

Applications
  • Removable and temporary fixings
  • Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green in masonry and aerated concrete
Building materials
Approved for:
  • Solid sand-lime brick
  • Perforated sand-lime brick
  • Solid brick
  • Solid blocks made from lightweight concrete
  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Building brick
  • Aerated concrete blocks
Also suitable for:
  • Solid and lightweight concrete blocks
  • Solid pumice and other solid building materials
You can find detailed information on building materials in the registration document.

Permission

  • ETA-15/0263
  • DoP 0195
For Details see corresponding Documents

Assembly Instruction

Functionality
  • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW. FIS VL or FIS P can be used but do not have approvals.
  • FIS E is suitable for pre-positioned installation.
  • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
  • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Technical Data

Technical Data

ETA-approval
Drill diameter 14 [mm]
Packaging Blister card
Amount 4 [pcs.]
GTIN (EAN-Code) 4048962217780
Legend   =  Permission Available

Documents for Downloading

Additional Documents

Approvals

Title Type Created Valid Till
ETA Certification Document (PDF, 7 MB) European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry ETA-15/0263 07/07/2020
DOP - Declaration of Performance (PDF, 7 MB) Declaration of Performance DoP 0195 04/08/2020
sc93-delivery-1