Art.-No. 539926

fischer Highbond anchor FHB II-A L Inject M16 x 160/60 R

Top Features

For high loads in cracked concrete.
Economical in serial installation.
Low drill hole depth means less drilling effort.
No drill hole cleaning when using a hollow drill with extraction.
Suitable for pre-positioned and push-through installation.

The economical solution in cracked concrete.

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

The Highbond anchor rod FHB II-AL Inject A4 is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject A4 for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Functionality

The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

ETA Certification Document

pdf, ETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

Created on 14/12/2017

DOP - Declaration of Performance

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

Created on 19/01/2021

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Valid from 15/07/2021
to 15/07/2026

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Valid from 07/02/2017
to 06/02/2027

Load Table

pdf,

Highbond-Anchor FHB II Inject - Permissible loads of a single anchor in normal concrete of strength class C20/25.

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	166 mm
Anchorage depth ( h_ef )	160 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962273052

fischer Highbond anchor FHB II-A L Inject M16 x 160/60 R

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download